If you are looking for the shortest path to connect your network to the Internet and you have a network cable handy at home, then Mikrotik Powerline Adapter is the solution you are looking for. This technology uses the existing electrical wiring for Internet access. The speed of your Internet connection is limited only by the quality of the electrical network wiring in your home. In this article, we will focus on the Mikrotik Adapter setup and review.
What is a Mikrotik Powerline Adapter?
A powerline adapter is an easy way of plugging into Ethernet without needing a wire. Using a powerline adapter you can find a place to plug in your router at your house without needing a cable. It uses your existing home powerline to transmit data.
Powerline adapters are a useful tool for people who don’t have a good Wi-Fi connection in their homes. While their speed is limited by the maximum powerline speed of the network, they are reliable once you have set them up. However, like any other technology, these adapters may be difficult to set up, as they’re not plug-and-play. These adapters connect Ethernet-enabled devices to a network just like a network cable would. In fact, the speed at which the adapters can transfer data is comparable to that of a network cable.
Mikrotik Powerline Adapter Setup Steps
These steps will guide you to set up a Mikrotik Adapter.
- The first step is to plug in the Powerline Adapter and connect it to your modem.
- Next, make sure that you have a working Internet connection before proceeding with this step.
- After that, install the RouterOS license on your Mikrotik Adapter.
- This can be done by logging into the router’s web interface and going to the System > License menu item.
- After that, you will then see two options, one for a trial license and another for a paid license.
- Select the paid option, enter your email address and click on the Get License button.
- The router will then send you an email containing your activation code which you can use on the Mikrotik website to complete the
Configuration Steps of Mikrotik Powerline Adapter
Setting up a Mikrotik Adapter is a very easy process. But there are some steps that need to be followed in order to make sure that the setup process is successful.
- First step would be to plug the adapter into a power outlet and then plug it into the router with an ethernet cable.
- The next step would be to connect the other adapter to another router with an ethernet cable.
- The last step would be to set up your computer networks settings so that it can connect wirelessly or through an ethernet cable.
How to make a powerline adapter faster?
Powerline adapters are preferred as they are generally faster than Wi-Fi and if your home has an electrical system. You can set up a network by connecting the adapters to the electrical mains and with the help of a powerline adapter, devices that are compatible with it can connect to your high-speed network just like a wired connection. Unfortunately, these adapters may slow down the speeds for no apparent reason, the reasons for which can be many and varied. To rectify the issue, try the following steps:
First, you will need to call your internet provider to see what they have to offer. If they don’t have anything, read on! You will need to pick up a power line adapter. This will also allow you to use your existing power lines to transmit data through your power lines. You’ll be able to get better internet speeds with no new cables necessary!
Troubleshooting steps
Here are steps to resolve the error of the Mikrotik adapter.
Restart the Mikrotik adapter
1. Locate the powerline adapter that you want to reset.
2. Restart the Powerline Adapter by pressing and holding the Reset button for 10 seconds or more.
3. Wait 10 seconds after releasing the Reset button, then release it again to finish restarting the Mikrotik Adapter.
4. Wait a few minutes, then plug in any other powerline adapters and try them to see if they work correctly now that they have been reset as well.
Relocate the powerline adapter
The Mikrotik adapter can be relocated to a new location by following these steps:
1. Disconnect the powerline adapter from the main power supply and from the PC.
2. Unplug both ends of the ethernet cable from the device’s sockets.
3. Connect one end of an ethernet cable to a computer and connect the other end to a wall socket near where you want to relocate your device.
4. Plug in your powerline adapter and wait for it to boot up, then plug it into a wall socket near where you want it relocated and wait for it to boot up again.
Reset the Mikrotik adapter
- Power off the Mikrotik Adapter
- Reset the Powerline Adapter.
- Reconnect the power cable and wait for it to restart.
Firmware update
The steps to update the firmware on the Powerline Adapter are as follows:
1) Connect your computer to the Mikrotik Adapter with an Ethernet cable.
2) Open a web browser and go to 192.168.1.1, where you will be prompted for a username and password. The default username is “admin” and the default password is “admin”.
3) Select “System” from the menu bar at the top of your browser window, then select “Firmware”.
4) Under “Firmware”, click on “Update Firmware”.
5) Select the file that you downloaded in step 1, and also click on Upload File.
6) After uploading is complete, reboot your Mikrotik adapter.
Mikrotik Powerline Adapter Review
We hope you enjoyed our article about the Mikrotik adapter. With this knowledge, we know that you can make the most of your home network as well as even get an extra boost in your business network by using powerline adapters. Powerline adapters are one of the best ways to get a high-speed internet connection in your home. They are also a great way to share a single internet connection with multiple devices. This guide will go through everything you need to know about setting up a Mikrotik powerline adapter. Powerline network technology is a new way of connecting devices to a network. It is faster than a Wireless connection and cheaper than Ethernet. It is also more reliable than Wi-Fi and can be used in areas where Wi-Fi signals are weak.