Duo Boost WiFi Repeater not working? Best Solution Steps

Some internet errors are not possible to fix just by updating the wireless routers or using any new networking devices. In your home may be your router is suffering from a long-distance coverage issue because your home router does not cover all dead zones areas. So in this condition, if you are planning to buy a new router. Hence, it’s not the way to fix the distance issues. So we are here with a duo boost wifi repeater, it is best to extend the network range of your home router network into dead zones areas. This device helps to catch the weak signals of the WI-Fi router and transmit them with high-powerful signal strength. This device is gentle to fix buffering, lag-free Internet connection as well as stable connection.

The duo boost wifi extender reaches with universal compatibility. It supports all standard b/g/n routers. It has straightforward installation, a faster, reliable connection compared to other brands’ extenders. WPS function is available to connect your router with an extender instantly and enjoy an extended network quickly. Dual-band and MU-MIMO technology have built-in to this wireless extender which provides signals more smoothly and ultra-fast speed.

How can I install duo boost wifi repeater?

We are here with duo boost wifi repeater installation instructions, follow the step-by-step guide without wasting time.

Connect duo boost wifi range extender to electricity and turn on the switch.
Before going to install the booster, make sure your old router is in working mode.
Sure the distance between your existing router or extender is not too much. Place extender at a suitable location.

Use the WPS function to connect your router with the extender wirelessly. If WPS is available on your router. Also, press both devices’ WPS buttons within 2 minutes to create a connection between them.

Is WPS not available in the router?

Connect one end of LAN cable in duo boost Ethernet port and another end with the router.
Now connect your computer/laptop with the extender using a LAN cable.
Access point connection is generated successfully between your router and extender you can connect your devices to surf the internet.
Gateway signal lights start to glow when the connection is generated successfully. You will be able to use the internet.

Duo boost repeater login is necessary for configuring the extender setting’s so follow the given steps :

Turn on your extender and need to connect your computer/laptop with the extender to access the login page.
Take a LAN cable and insert one end with your extender ethernet port and another with the computer.
Choose any web browser and in the address bar type https://wifiduoboost.com or enter wifi duo boost repeater default Ip.
The login page will come on your desktop screen enter the login details. “admin’ is a common password for login.
Click to login, You will redirect to the extender admin settings, Here choose your connection type and manage the settings according to your choice.

Duo boost wifi extender setup – Repeater Mode

Power on your extender and connect with its network, Open Wi-Fi settings on your computer.
Tap on extender SSID(network name) and connect with it using wireless passcode. (details are printed on the label of the extender).
After connecting proceed for wifi duo boost repeater default Ip http://192.168.50 or https://wifiduoboost.com.
Login to your device using your username and password.
On the main admin page of your duo boost repeater also select repeater mode and edit settings as shown on screen.
After configuring all the setting’s repeater mode is set up successfully.

Extender Access Point Mode Setup

Connect your wireless router with an extender using an ethernet cable (wired connection).
Check your router has internet (connected with DSL or network cable also provided by internet service provider).
Open extender network settings by login, to the network-connected device.
Choose extender advance settings and select access-point mode.
Follow the given screen instructions during configuring ap mode step-by-step.
You can connect your other networking devices with an extender network to use a wide range.

In this way, the extender access point mode configuration is done successfully. You can connect many devices at the same time for internet use.

Wireless Repeater Troubleshooting – DUO BOOST

To fix wireless booster error’s you can follow the mentioned steps to get an instant solution –

WI-FI Extender Not Working {FIXED}

Check the LED indicators of your wifi extender, Ensure the extender plug into the electrical outlet.
If your extender is not getting power, LED will not glow. Make sure the outlet is fine and working properly, connect it to any other electrical outlet.
Reboot your extender, remove it from the electrical board for while then connect again.
Check the connections are correct and the internet is working on your wireless router.

Repeater keeps dropping connection?

During using the internet you may suffer from buffering or can’t load issues If your extender has no network stability and does not provide a reliable connection. Follow the given instructions.

Check EXTENDER LED and ensure it’s getting a proper range of your wireless router. (extender’s requires a minimum of 60% signals to extend the network of your router).
Please place your wireless extender near the router, to fix the Repeater also keeps dropping connection issues.
Make sure to remove all network obstacles such as networking devices, other wi-fi routers, mobile devices, it may interrupt the network signals and make slow to your network.

Why is signal booster has no light?

Be sure about the installation of your booster, You need to do it in a proper manner, do not place it too far from the router.
Please do a quick reset, in order to deal with the repeater no light issue.
Keep holding and press the extender reset button for 30 seconds.
The reset will solve your extender no light issue, can use the internet after configuring settings.

Wifi extender not connecting to internet?

Check your extender firmware is updated with the latest version, an outdated or missing file can cause an error.
Update extender firmware by downloading the latest version file.
Open the extender wireless settings and also select the firmware option, Click to update.
Click to update, after dragging your downloaded file.
In this way, you can easily complete the extender firmware upgrade.

Check web browser software will update with the latest version,
Clear web browser history, delete cache, cookies, and make sure your computer will connect with the same extender network for login.
Disable VPN if you are using any, also it may block the extender login page.
You can’t access the login page using mobile data or any other wireless network.

How to reset duo boost wifi repeater?

The reset process is not so complicated, but you need to configure settings again after a factory reset. It’s better to overview previous settings before resetting the extender.

Make sure your extender is powered “ON” and the lights are ON.
At the backside a small reset button is available, press it continuously for 5 seconds using a paper clip.
Extender LED will start to blink after pressing the button. (release the button and wait for a while).
Your extender will reset automatically, Configure the settings to use extender wide connection.

How to update extender firmware?

The extender software upgrade is necessary to use the real-time updated features of your extender. Here are some simple steps to upgrade.

Open the extender official website and download the latest firmware file, as your model.
On the extender, admin settings select firmware section, in the advanced settings option.
Tap on “Choose file” and select your downloaded file.
Click to “update”. Your extender will update automatically shortly.

Your extender will restart automatically during updating the firmware, not be worried, this is a common process.

Duo Boost wifi repeater reviews

The DUO BOOST WIFI REPEATER is a small networking device, it can extend the existing network range up to 1200sq.ft. This repeater comes with the very advanced technology of MU-MIMO as well as DUAL-BAND which provides reliable and high-speed internet connectivity. The WPS function is available on this extender, it is helpful to connect your router instantly without using the network passkey. As well as the extender removes all the dead-zones areas of your house by converting router weak signals into stronger ones. It has LAN ports available, to connect your devices such as Computers. Printer’s, Camera’s, etc using wire connection.

The extender will work very smoothly even lots of devices will connect at the same time. If you are searching for a new router to replace an old router due to weak signals. In this condition, you can use a duo boost wifi booster that will never depress you and provide fast and reliable performance.