The demand for getting more and more wireless networks has been escalating rapidly with new smart technology like streaming devices and virtual assistant speakers such as Amazon Alexa and many more. So here we introduce one of the finest and most innovative Linksys wifi extenders which provide a mesmerizing balance and also keep up with the needs of those users who are the most dependent on internet working devices. Thus, the Linksys wifi extender setup is also easy and you can use different modes to complete the configuration of the wireless range extender.
The Linksys wireless range extender provides great balance and high-tech support with the base of at least one Ethernet connection. If you are one of those who are looking to support multiple technologies at one time then you have landed on the right article. Here, you will get every piece of information about the Linksys WiFi Extender Setup and configuration guide.
Why Linksys Wireless Extender?
Well, it is already mentioned that it provides multiple technologies at the same time and this is not the only answer as to why only the Linksys extender. There are various reasons that show the performance of Linksys extenders is better as compared to other usual range extenders in the market. Also, the Linksys WiFi Extender Setup is simple and intuitive. Actually, this whole guide is completely dedicated to the Linksys WiFi Extender Setup by accepting different methods which are easier and simpler.
Besides, you can read out the below-mentioned points that clearly explain the advantages of the Linksys extender and why you should own such a definite extender.
Reason to make it yours
- The Linksys wifi extender provides 866 Mbps + 300 Mbps of high-speed altogether and also it supports easy mesh technology that is compatible with an easy mesh system when the firmware upgrade is required.
- However, it also provides dual-band fast connections that can access 1000 square feet of area conveniently.
- It also has the power to handle more than ten wireless connected devices at the same time. Also, the easy mesh system provides additional coverage and the ability to cover more dead zone areas.
- In addition to this, you can stream to multiple devices by using multiple users’ multiple input multiple-output technologies. (MU-MIMO).
- However, it also uses a direct wire connection and is able to connect to 5 x 10/100/1000mbps (1 WAN and 4 LAN) Gigabit Ethernet ports.
- You can also enjoy advanced guest wifi access as it can help to keep away the unwanted guest and you can off the network to make your network private and can connect to more devices and enjoy the stuff.
- Along with the guest mode, you can also take the benefit of parental control and safely access the network in your private zone that remains safe and secure.
However, the Linksys wifi extender setup can also be completed by using a WPS button. In the same manner, you just have to push that button and the device will start adding more devices to your network so that you can access a safe and secure connection at each and every corner of your home.
Linksys WiFi Extender Setup using Extender.linksys.com
The Linksys wireless range extender provides you with repeated wireless signal connections of any wifi router or any access point mode that lets you connect to the internet connection. Sometimes, it is hard to connect to reach dead zone areas through a wired or any wireless connection. Nut when you have a Linksys extender then you don’t have to worry about anything. Thus, here is the solution for your help. As this whole guide is based on the Linksys wifi extender setup and its configuration methods.
Before you connect:
Before you connect to Linksys wireless extender, you have to keep some of the important points in your mind that keep the hurdle away from your path. Also, ensure that you have properly followed all the things that are mentioned below:
- First of all, you have to identify the wireless settings of the router and the access points and make sure that you have all the certain things and they are;
- A wireless network name of the range extender (SSID)
- Wireless network or the security key and the wireless password
- A wireless channel
You can also check the settings of your home router to manage the same activities with the Linksys range extender. Besides, if you have a classic old wireless router then you can complete the Linksys wifi extender setup using a web-based setup page.
- After finding all the network access of the wireless range extender, you have to do the reset of the Linksys wifi extender and for that, you have to press or hold the reset button that may be located at the bottom of the extender. Push that button for more than ten seconds or until you find a red LED that starts blinking to restore to its factory default settings.
After doing all the basic steps to complete the Linksys wifi extender setup, you have to go through it step-by-step to establish a connection with wifi-enabled devices.
Linksys wifi extender Setup using extender.linksys.com or “192.168.1.1”
In these steps, you clearly have to enter into the login page of the Linksys wireless extender by using a default IP address or a web address. Proceed to the steps
- Primarily, you have to connect the desktop computer by using an Ethernet port to connect to the wireless extender with the help of the Ethernet cable.
Note: Also, you have to ensure the cable while connecting both the devices as it may vary the type of device or the range extender you are using, so be sure about it before using the cable.
- After that, safely plug the wireless range extender into an electrical outlet and wait until the LEDs of the range extender are stable completely.
- Afterward, you have to launch a web browser on a PC or a laptop and carefully retype the default IP address into the address bar “192.168.1.1”.
- In such a case, the default IP address won’t work, then you can retype the Linksys extender web address “extender.linksys.com” and click on the search button.
- You always need to make sure that every computer has a defined default web page and the browser, so you have to check the dialog box before entering the password and the admin username, or sometimes the details will automatically appear to you. You just need to be careful about this thing.
More Points
- After entering the default IP address or the web address of the Linksys extender, you will be prompted to the login window where you have to enter default credentials such as admin username and the wifi password of the extender.
- In that case, you can simply leave the username field blank and enter ‘admin’ in the wifi password field and then click on the “login” button.
- Now you are successfully entered into the homepage of the wireless extender and you have to click on the basic wireless settings section and then tap on the wireless button.
- After that, you have to set the radio button to the manual and kindly enter the network name of the extender.
- Now you have to jump on the wireless security section and click on the settings to match the settings of the router during configuration.
- Lastly, you have to unplug all the electrical power cables of the wireless home router and the Linksys extender for half of a minute and then plug in the router first and wait until all the LEDs of the router are stable and do the same process with the Linksys extender.
Finally, the Linksys wireless range extender has been successfully integrated with your wireless home router. Now enjoy a safe connection.
Linksys WiFi Extender Setup Using WPS Button
So here is also another method of setting up the range extender. The use of the WPS button is way simpler than using a web address or the default IP address. You simply need to push the WPS button for a few seconds and then it will be connected. Let’s understand this journey by taking a few steps into consideration. You just have to follow the below-mentioned instructions for the Linksys wifi extender setup using a WPS button.
- You first need to insert the Linksys extender into a power outlet or electrical socket.
- Then, you have to push or hold the WPS button of the range extender.
- When the WPS LED starts blinking then steadily leave the button as it shows a successful WPS setup of the range extender.
Linksys extender setup using a web-based WPS button
The use of the web-based button provides three simple options to connect to the range extender. Thus, you can wisely use the WPS button, WPS pin and another one is the use of the wireless router’s pin.
Using WPS Button
The WPS Button steps to connect to the Linksys range extender have been clearly mentioned in the above section. After connecting to the extender with the WPS button, you first have to log into the Linksys range extender by using your default credentials. After entering the homepage of the Linksys extender, you first have to click on the wireless section and then click on the WPS button. Afterward, you have to push or press the WPS button on the Linksys extender and wait to get started with the wifi setup process. Lastly, you have to click on the enable option that you can easily find next to the WPS button.
By using the WPS PIN
In this method, you have to input such numbers into the next field to the WPS button. It shows the on and off chance that simply includes some numbers of your wireless device. You simply have to enter those numbers into a field after completing the WPS button setup using a web-based page and this is it.
By using the default router’s PIN
Sometimes the wireless device asks for a router’s PIN and this thing leaves you to remain questioned. In that case, you have to input those numbers in a third field on the extender.linksys.com web-based setup page.
Once this segment has been completed then you will find the LED light will stay continuously lit and that shows that the Linksys wifi extender setup using a WPS button has been completed successfully.
Helpful Troubleshooting Ideas to fix the Linksys wifi extender problems
If you face any problem while setting up the Linksys range extender, then here are the troubleshooting tips that can actually help you a lot to fix that problem.
- The first thing you have to check is the position and the placement of the Linksys extender with the router. You also need to take care of this point even after setting up the extender. Because most of the setup problems begin to terrify you after completing the setup. Simply, place the extender into an optimal place. Also, keep checking the LEDs of the extender to find an exact location.
- Also, you have to keep the antennas of the Linksys extender in a vertical position to get a fast and stable connection.
- You also have to take care of the electrical sockets by making sure that the plugin which you are inserting the extender into should not be short-circuited or damaged. If it is so, then you have to try another electrical socket or power plug.
- Besides, you also need to check by ensuring that you are using the latest version of the internet browser for the Linksys wifi extender setup.
So these are the helpful troubleshooting ideas that you can adopt in a certain setup problem. These ideas will surely help you to fix the problem even after setting up the Linksys extender.
Final words
This is all about the Linksys wifi extender setup. In this article, you will find different methods of settings up the extender with your home router. However, one of the safest methods is competing with the Linksys WiFi Extender Setup using Extender.linksys.com. In case, the web address of the Linksys extender doesn’t work, then you can use a default IP address. Also, you can set up by using a WPS button. Use a web-based WPS button to complete the Linksys extender setup. In case, if you are struck anywhere during the setup process then the troubleshooting tips are also provided for your help. Keep enjoying the whole configuration process of the Linksys extender.