The Anker Wireless Charger comes with a high-speed efficient chipset that provides 10 watts of high-speed charging for iPhone and Samsung Galaxy mobile phones. This provides high efficient speed for charging mobile phones. Also, you can charge your iPhone mobile and get a boosted connection of 5 watts that can charge 10% faster as compared to other wireless chargers. However, the Anker wireless charger can fit and take the charge in landscape orientation while you are watching your videos in portrait mode. This also helps you in activating other important things such as facial recognition and messaging your favorite person.
Thus, the Anker wireless charger can be fumbled with your mobile case. The power waves that are built in help in transmitting the charging power directly to a protective power case. In addition to this, you will enjoy all the major components while using it with your mobile phone. But still, people fall into unknown trouble that creates too many problems while charging the phone using an Anker charger.
What are the Issues with Anker Wireless Charger?
The Anker Wireless Charger has a line of PowerCore portable chargers that smartly can charge your mobile phone by using a USB port and device. Thus, it provides the leverage that includes a high capacity of battery cells and it also provides enough energy to power up your smart Android and iPhone devices multiple times over Bedford there is no need to charge or recharge it.
But still, the users of the Anker wifi charger face common problems with these kinds of chargers that are mostly associated with powering up the battery of the mobile charger. So here is the list of those common issues that you might face with your Anker charger. Along with the problems, you will find solutions in the next section. Read on…
- The Anker charger stops charging the mobile phone
- It stops working with iPhone or Samsung mobile devices
- It is connected to your mobile phone but not charging
- The LEDs of the charger continuously flash… What does that mean?
- The charging keeps pausing or charging the device slowly
So these are the problems that you could face with the Anker wireless charger. If you are one of them who are facing any of the above-mentioned problems with your charger and mobile phone, then fret not. Here are the simple and legit solutions to your problem. Keep reading…
Troubleshooting issues with Anker Wireless Charger
Well, the Anker wireless charger is probably the most wanted way to charge a mobile phone. Because it provides high efficient speed to the mobile device and also acts as a protective case in which you don’t need to use pesky cables. However, all you need to do is to plug the wireless charger into the charging pad and others on the top of the phone.
Before you dive into this helpful guide you should try some initial troubleshooting steps. Sometimes the problem is not too big and you can also avoid it by trying out the initial steps with the charger.
The first thing you need to prevent mobile phones from wirelessly charging on the pad. Another thing you need to check on the power. Sometimes there may be no power flowing to the charging pad. So that you need to make sure that the charging pad is properly plugged into a power source.
If you have tried the initial troubleshooting points and it did not help you then you can try other steps.
Anker charger won’t charge the mobile phone
Check out the troubleshooting steps and follow them in a proper manner.
- First, you need to ensure that the power outlet you are connecting to the charger is working. If possible, then you can try another electrical outlet to see if the problem is in the charger or in a plug.
- If you notice the problem might be with the charger and it doesn’t charge while you have connected other devices to it, it is charging. That happens because the battery is not good to use and it results that the charger doesn’t make it possible for you to charge the mobile.
- You can also use a Micro USB cable that comes along with the Anker charger and it is a certified third-party cable that also provides backup power. Also, third-party cables can do a lot of deals that are safe from harming the connected devices as they are certified and tested.
The Anker wireless charger does not work with Samsung and iPhone mobile devices
However, if it is not charging iPhone or Samsung mobile devices then there might be a certain reason behind that. Here we will show you steps to fix the problem with the device.
- You can restart the mobile phone. It is the first thing that you probably could do with your mobile phone. Sometimes, restarting a mobile phone could fix minor software issues and glitches that might prevent the mobile from charging.
- The second thing you can do is to hard reset your phone. A hard reset will forcefully turn off the mobile phone and quickly turn it on. Thus, it may temporarily fix the problem if the mobile is not charging wirelessly
- Sometimes, the mobile phone cases are too thick to keep the mobile phone while you may charge it wirelessly. In case, the mobile cases are not suitable with the charger and they can take off the case before placing it on a charging pad
The charger is connected but not charging
If this problem also happens to you, then simply try out the following troubleshooting steps to avoid issues.
- First of all, you need to ensure that the charging cable is firmly connected to both devices and it is charging appropriately. In addition to this, you can try using a different cable that does not harm or does not have issues with the cable that is currently connected to the mobile.
- If the connected mobile or any device is still not working or charging quickly enough and you also want to connect the charger with multiple devices. Make sure that all the wireless devices are securely connected to the charger and provide the same amount of power to the connected device.
Why do the LEDs of the Anker wireless charger keep flashing?
So there are a couple of reasons behind when the LED light of the Anker charger flashing and here are the reasons and solutions.
- If there are multiple devices connected to the wireless charger, then you will notice a LED display show you the percentage that reflects how much battery is available for your use
- If the wireless charger is connected through a USB cable to a power outlet and Anker charger then it will show you a percentage LED light on a connected device. That lights up and shows you the actual percentage of the connected device battery. You can check the LED throughout the charging process and when it is full then you can use it.
- All the LED lights on the wireless charger will be completely dark when the device’s battery has been charged completely.
The Anker wireless charger keeps pausing or charging the device slowly
When the charger works slowly or keeps pausing then this becomes frustrating sometimes. The clear reason behind this problem is when the mobile device fails to make a clear-cut connection to the charging pad then it keeps pausing.
So one helpful solution is to pick up the phone and reposition it with the wireless charging pad. Also, it is a successful idea to wipe off the back of the mobile and the charging pad completely. Sometimes a layer of dust can cause charging issues.
Sometimes the charger works slowly and it could happen with any wireless and wired charger. You just need to ensure that the charging pad is securely plugged into a power outlet source and enough to provide a safe connection. However, this problem happens when the charger is connected to a USB port of the laptop or PC and the ports of these devices are not strong enough to make it compatible. So make sure to plug the charging pad into an electrical outlet instead of using a USB port of a laptop or computer.
Conclusion
So now you are completely aware of the actual problem with the Anker wireless charger and the reasons behind it. In this troubleshooting guide, we helped you from the initial troubleshooting steps to the advanced helpful steps that you need to take if you fall into this kind of issue with the charger. Hope this guide helps you and your charger start working by adopting these troubleshooting steps.