Are you trying Beta IOT WiFi Extender Setup? Get the Best Steps

Are you peeking for a networking device that absolutely abolishes WiFi dead zones and lagging network connectivity? So, there is no better networking device than Beta IOT WiFi Extender. It magnifies prevailing network signals and delivers an ultrafast WiFi range. As well, the dual-band networks completely comply with this WiFi extender that offers a reliable network. In addition, with the dual-band network connectivity, you can handily take the experiment of gaming consoles, and HD streaming videos, and share long files everywhere. Basically, the Beta IOT WiFi range extender supports 3-in-1 modes(Router, Access Point, & Repeater) Which accomplish all requirements. In other words, the 4 high-power external antennas work appositely that enlarge the coverage & enhance Wi-Fi performance.

Furthermore, to amplify the Wi-Fi signals & robust the Wi-Fi coverage with the Beta IOT WiFi extender, the setup is requisite. If you are examining the steps about how to set up Beta IOT wifi extender, then do not deem it. This blog will present you with some of the best steps by which you can handily do the setup of the extender.

Get the Beta IOT WiFi extender login steps

To set up your Beta IOT Extender from the web-based interface, the login page is vital. Come let’s see how to certify the login interface and login.

Firstly, you need to relate your wired(pc) or wireless(mobile) device to the extender’s Wi-Fi network connectivity. With the Beta IOT_EXT network, you can quickly relate your operating device to the network.
Then you have to open a browser that is similar to you and put down the 192.168.188.1.
After this, you will notice the login interface pop up on the screen of your device.
You have to put down the login username/password on the certified login interface.
In order to do Beta IOT wifi extender login, opt for a language in the below list. ‘
Next, put down the admin name and password for your Beta IOT extender.
Eventually, hit the login icon.

Beta IOT WiFi extender setup without WPS

In order to do the Beta IOT wifi extender setup without WPS, just follow the below complete setup steps.

First and foremost, log in to your Beta IOT extender into the internet-based interface.
In addition, from 192.168.188.1 an admin, you can conveniently log in to your extender.
Henceforth, it will take you to the Beta IOT wireless range extender setup interface.
The Beta IOT setup interface will scan the available Wi-Fi networks.
On the home, Setup interface, opt for a Wi-Fi network of your prevailing device and put down the password key.
In the last step, hit the Apply icon.

Step-by-Step Beta IOT WiFi range extender setup with WPS

You can also set up Beta IOT WiFi Range Extender by pushing the WPS button. Let us proceed with the Beta IOT extender setup process.

Initially, you have to take the Beta IOT extender from the shipment box and relate it to the wall outlet around the router.
Next, knob the Beta IOT extender power button for a jiffy. Then, you have to stay calm till the Power LED turns solid green.
When the PWR LED is steady green, ascertain and clasp the WPS button of your Beta IOT extender.
In the same way, also clasp the WPS button on your available Wi-Fi router.
Thereafter, wait for a couple of minutes till the WPS LED changes into a solid green.
At last, you can join the Beta IOT Wi-Fi range extender to the other Power Supply Unit.

And that’s it! The Beta IOT wifi booster setup steps are successfully finished.

Best steps for Beta IOT WiFi repeater configuration

Let’s get started to do the configuration of your Beta IOT Wi-Fi range extender.

Natively, log in to your Beta IOT extender into the internet-based utility.
From 192.168.188.1, you can quickly log in to your range repeater.
Next, you have to arrive at the home setup utility of the Beta IOT range repeater.
To configure the Beta IOT wifi extender as a repeater, you have to opt for the repeater mode tab. Then, put down the SSID, and security key, & pick security.
Henceforth, click the Wireless tab and probe all settings of your extender.
If you need to bisk the Wi-Fi speed, toggle the 5GHz network.
To secure the Wi-Fi network, toggle the WEP security.
Next, opt for the best internet connection to take a better network experience.
To save the Beta IOT wifi repeater configuration, hit the Finish icon.

Troubleshooting steps for Beta IOT Wireless range extender

Here are some Beta IOT wifi extender troubleshooting steps to rectify the bugs & issues.

Power cycle your Beta IOT extender:

If you peaking the Beta IOT wireless extender with no internet error, so we urge you to adopt the below steps.

First of all, head over to your Beta IOT extender and switch off the power button that is discovered on the left panel.
Later, you have to remove the Beta IOT extender into the wall Power Supply Unit for a jiffy.
Thereafter, relate the Beta IOT extender to the Power Supply Unit.
At last, knob the power switch momentarily.

Change default password:

To bisk, the Wi-Fi speed, change the Beta IOT wifi extender setup password.

Open the Wireless tab in the Beta IOT extender setting.
Next, ascertain the password tab in the following sections.
In the password tab, put down a new password.
To save the Beta IOT range extender default password, hit the Apply icon.

Check the login credentials & location:

To resolve the error, you have to verify the login username/password.
Ensure, write down the correct password and username in the appropriate tab.
You have to ascertain that your extender is not in place more distance than the router.

Reset your extender:

For the Beta IOT wifi extender not working problem, you can perform a factory reset of your extender.

Natively, switch ON your Beta IOT Wi-Fi range extender.
Then, detect the Beta IOT wireless extender reset button on your extender. This button is situated on the rear surface.
By utilizing the solid pin, knob the reset button for approximately 8-10 seconds.
Subsequently, the Beta IOT extender will reset and reboot.

Beta IOT WiFi repeater firmware update steps

In order to update the Beta IOT wifi extender firmware, just look at the glance in the given below steps. Let’s begin to update the firmware.

Basically, search the recent firmware file by visiting the official website of the Beta IOT extender. Then, you have to download the file.
Now, you have to get the login interface with ap.setup and then login.
Then, you have to open the More tool option and unearth the Firmware update icon.
To load the file, hit the Browse tab, and load the file.
When the file is entirely loaded, hit the Upgrade icon.
After upgrading the latest firmware, the Beta IOT extender will reboot.

Beta IOT Wireless range extender review

In my point of view, the Beta IOT wifi extender review is exquisite and better than the other extender brand reviews. It has two networks like 2.4GHz and 5GHz that speed up Wi-Fi signals. In addition, the four external antennas are also built-in, which enhances the Wi-Fi performance. The design of the Beta IOT range extender is precise and sleek, directly attaching the extender to the AC joint. The front surface of this extender has LED lights which help a lot to provide the signal status. Moreover, you can also detect the quintessential location. The 802.11ac network complies with this range extender that proffers 3× brisk Wi-Fi speed. The web-based setup of the Beta IOT extender is not complex. Also, do the quick setup with the WPS button.