Kitchen sinks have garbage disposals that are used to process food scraps. They are positioned between the trap and the drain in the cabinet beneath the sink. Since all kitchen sinks have standard drain hole widths of 3.5 to 4 inches, all garbage disposals are designed to accommodate all kitchen sinks. While most manufacturers designed them to work with piping that drains into a municipal sewer system, others have created disposals that are safe for septic systems as long as you’re only disposing of food scraps. You can get the InSinkErator Garbage Disposal for your home.
The InSinkErator Garbage Disposal is a great unit for the money. Its affordable pricing makes it the ideal choice whether you need a replacement right away or are just looking to install a reliable performer. To assist you in determining whether the garbage disposal is the best option for you, we’ll go in-depth about it. There are plenty of garbage disposals in this price range, but it can be difficult to locate one that is dependable and long-lasting.
Mounting Assembling instructions for the InSinkErator Garbage Disposal
Here are the InSinkErator Garbage Disposal mounting assembling instructions which you need to follow carefully. Also, know what major parts are required for the installation of the garbage disposal.
- A strainer basket and cover for the plug (Evolution 250, Evolution 150, E75)
- Plug and Strainer Basket (Evolution 200, Evolution 100, Evolution 200 Supreme, Evolution 100 Supreme)
- Stopper (S60 Supreme, Models 66, 56, 46, LC-50)
- Sink Flange
- Gaskets made of rubber (2)
- Fiber Gasket (optional)
- Screws
- Mounting Ring
- Backup Ring (3)
- Snap Ring
These are the things you need for the installation of the garbage disposal
InSinkErator Garbage Disposal Installation
Follow the steps for the effective installation of the InSinkErator Garbage Disposal.
- At the circuit breaker or fuse box, shut off the electricity. Then, separate the drain top from the waste discharge tube with adjustable pliers.
- With one hand holding the garbage disposal, place the end of the wrenchette or screwdriver into the right side of one of the mounting lugs on the lower mounting ring. To release the garbage disposal from the mounting assembly, lift the garbage disposal just a little bit and use the wrenchette or screwdriver to push or pull the lower mounting ring to the left.
- Remove the electrical cover plate from the bottom of the garbage disposal by turning it on its side. Wire connectors should be removed by loosening the green ground screw.
- Disconnect the electrical supply wires from the garbage disposal’s wiring. Wires from the garbage disposal should be unplugged after loosening the screws on the electrical clamp connector.
- Loosen the three mounting screws, use a screwdriver to push the snap ring out, and then take out the previous mounting assembly to remove the existing mounting hardware.
- The old sink flange should be pushed up through the sinkhole. Remove all of the old putties from the edge of the sinkhole with a screwdriver or putty knife.
- Put a rope of plumber’s putty 1/2 inch thick around the sink’s drain opening. Press the new sink flange into place after dropping it into the drain opening.
More Points to read
- The sink flange can be held in place while being mounted to the sink by placing a weight on top of it, such as the garbage disposal. Put a cloth between the sink surface and the weight to prevent scratching of the sink or the flange.
- You must remove the dishwasher knockout plug if you are using a dishwasher. Put the garbage disposal on its side as well as tap it out using a screwdriver and hammer. Next, take out the garbage disposal’s loose knockout plug.
- Take off the electrical cover plate and flip the garbage disposal around. Disconnect wires. Run the electrical cable through the access hole on the bottom of the garbage disposal and insert the cable connector (not provided). cable connector nut.
- Replace the electrical cover plate after pushing the wires into the garbage disposal (but keep the cardboard shield in place).
- By lining up the three mounting tabs with the slide-up ramps on the mounting ring, you may hang the garbage disposal. Turn the lower mounting ring while holding the garbage disposal in place until all three tabs are securely fastened to the mounting assembly. Currently, the garbage disposal is hanging by itself.
- Place the clamp over the discharge tube and into the groove on the rubber tailpipe coupler after inserting the discharge tube into the discharge coupler.
- Align the drain trap and discharge tube by rotating the garbage disposal. Cut off as much of the discharge tube as is required if it is too lengthy.
Finally, you should test for leaks at the sink flange, dishwasher, tailpipe, and mounting assembly connections for garbage disposal.
InSinkErator Garbage Disposal Troubleshooting Tips
An InSinkErator garbage disposal, like all kinds of disposals, can malfunction in a variety of ways despite the appliance’s apparent simplicity. Many potential issues with your InSinkErator are straightforward. However, you can try these tips when the InSinkErator Garbage Disposal not working appropriately. Do It Yourself solutions, but you might be unable to properly address some issues without a plumber’s assistance.
Tip #1:
These are typical indications that a garbage disposal isn’t operating and what to look out for before fixing one.
- You flip the switch, but the garbage disposal won’t turn on.
- The switch for the garbage disposal is broken.
- While not in use, the device is humming.
- The trash can won’t shut off.
- Water puddles suggest leaking garbage disposal.
- The garbage disposal either drains slowly or not at all.
Read more- Key Troubleshooting Steps Of Ring Contact Sensor Not Connecting
Tip #2:
Gather Tools and Materials. Before beginning your garbage disposal repair task, gather the following materials:
- Pair of screwdrivers
- Hasp key
- Ratchet for garbage disposal
- Flashlight
- extended-nose pliers
- Clamp \sBucket \sPlunger
Tip #3:
Check Electrical Connections. If there is absolutely no activity coming from the disposal, there can be an electrical issue. You’ll need to know how to reset the garbage disposal at this point.
- On the garbage disposal, where is the reset button located? In most situations, it is at the base of the apparatus. Once you’ve found it,
- performing the reset is not too difficult.
- Once you have identified the reset button, follow these instructions to reset the garbage disposal:
- Verify the plug-in status of the garbage disposal.
- Try turning the unit on after pressing the garbage disposal reset button on the device’s bottom.
- If the circuit breaker to which the item is connected has tripped, check your main electrical panel.
Tip #4:
Follow the InSinkErator Garbage Disposal reset instructions
- Turn off the waste disposal’s power. Either discover where the appliance is plugged in under the sink and unhook it or turn the wall switch to “off.”
- Locate the overload protector and look it over. It’s time to reset if it protrudes by roughly a quarter of an inch.
- Reinstall the overload protector gently. Wait 10 minutes before continuing; if your disposal has heated up, this will also give it time to cool down.
- Repeatedly inspect the overload protector. If it is flush right now, the reset was successful. Repeat steps three as well as four again if the button has popped out once more.
- Start the sink. Turn on cold water so that it enters the garbage disposal after the overload protector has been flushed.
- Return the power. Reconnect the garbage disposal’s plug or wall switch. Also, turn it back on under the sink. Now it ought to operate normally.
If none of these solve the problem, the garbage disposal installation wiring needs checking.
Review
The InSinkErator Garbage Disposal offers a piece of mind thanks to a 2-year warranty from the widely regarded InSinkErator brand and also a durable 1/2-horsepower engine. Given its small size and reasonable price, it is a wonderful option for someone who is in need of garbage disposal. It can fit beneath practically any sink. Is it, however, the best disposal for you? Let’s examine the disposal in detail to aid in your decision. As a result, medium-sized households that generate a reasonable amount of food waste are perfect for the garbage disposal’s 1/2-hp engine.