Tech has grown into an established brand in the baby monitor industry. These currently manufacture and sell several of the best models that use sound and video. However, just like every other brand you could imagine and name the name of, even VTech products can be prone to malfunctions. It is therefore crucial to be aware of the VTech baby monitor and troubleshooting.
If your monitor isn’t switching on, you hear the static sound, issues in signal coverage, or the issue is completely different. The tips provided in this article are extremely helpful.
How to troubleshoot VTech Baby Monitor Problems?
VTech DM111-2 LED Lights Not Working
The LED lights on the VTech DM111-2 baby monitors are crucial indicators that need to be working properly throughout the day. If the lights on your display aren’t functioning. It’s likely that the battery is damaged or you have an issue with the motherboard.
Examine these batteries to determine if they appear to be the cause. If the batteries work well, it could be an issue with your motherboard, and in that case, it should be replaced.
Most Related Post- A complete iBaby monitor guide – Installation, Setup, and a Review
VTech Won’t Turn On
If your VTech Video or Audio Baby monitor isn’t turning on regardless of what number of times you attempt to push on the power button. It’s most likely that the issue is with the power cable or battery. The monitor won’t turn on because you’ve either drained batteries or your device is damaged. Charge the monitor and attempt to switch it on. If the device isn’t turning even after replacing the battery, then replace the battery. Try again.
If you’re certain that the battery in your device is in good shape. However, the display won’t start up when connected to an electrical source, you may have a damaged power cable you’ll need to replace.
VTech Baby Monitor Keeps Cutting Out
You do not have to do anything since the monitor being cut off is a common issue that will resolve itself. The majority of the time the screen is cut off. When the camera is trying to connect with the parent unit following the loss of signals. This can also happen when you shut off the camera and then turn it back on. The cutting-off process is a re-calibration. This means reconnecting with the parent unit, ready to stream again.
VTech Baby Monitor Night Vision Not Working
The night vision of the VTech baby monitor could not be functioning because of an issue with the power supply or battery. It may also be due to an issue with the settings on the monitor.
The VTech baby monitor issue for night vision isn’t a difficult one. The issue can be fixed by:
- You can restore the settings of your VTech baby camera’s settings to its default settings
- Replace the battery in the camera in the event that the battery is damaged to give the camera enough power to enable night vision.
- Choose a different source of power or use an alternative power adapter for the camera
VTech Wifi Monitor Keeps Losing Connection
There’s a chance that the VTech baby monitor is losing connection due to:
It’s because the Wireless connection isn’t sufficient for streaming HD videos in real time between your transmitter and receiver. This issue can be fixed by altering the location of the antenna and enhancing your wireless network.
Turning off the parent unit as well as the cameras on and off again may help resolve the issue. Also, bring you a reliable connection. There’s a chance that the VTech smart baby monitor keeps disconnecting because the Wifi network at your home is not able to stream HD videos in real time.
To decongest your network:
- Shut off your wireless router for approximately 60 minutes
- Turn off the baby’s monitor and then switch it back on.
- Re-establish the connection with the baby monitor and Router Mode to access a distinct Wifi channel within the home network.
VTech Baby Monitor Keeps Beeping and Vibrating
There are several reasons why your VTech baby monitors are likely to sound. It could be that the device is experiencing problems with one or more or all of:
- Range: The baby and the parent’s unit could be out of the baby monitor’s range. Try to get the receiver closer to the transmitter to see whether that resolves the issue.
- Antenne: The audio that comes from your monitor may be due to the antenna being in trouble. The wires that connect it to the motherboard might be loose or broken. Check out the antenna replacement guide below for an answer.
- The battery: The battery might be defective or is not working properly. It is recommended to charge the battery or get it replaced to eliminate the irritating beep.
- power supply: It may be because the battery seating is an issue connecting to the motherboard or the power supply jack could be damaged or missing. Make sure the power supply is repaired or repaired as fast as it is possible.
If the range antenna, battery as well as a power source are in good working order however you are still hearing the sound of beeping coming through the VTech Baby Monitor, then it’s likely the motherboard is in trouble.