The Netgear Nighthawk AX4300 WiFi Router provides faster network services to mobile devices with a powerful 4.3 Gbps of speed. However, it has a robust 1.5 GHz triple-core processor. With the help of that processor, you can smartly and fully upload. Also, boost the overall performance of the existing network connection. In addition, the wifi router can keep up its powerful performance. Save your family from online threats by activating the automatic shield to protect all the wifi-connected devices.
The most important thing about the Nighthawk AX4300 WiFi Router is that you can easily add and activate the smart parental control feature. It will help to save the kids and you can also manage their time online. Additionally, Overall, you get the fastest ever speed available to your devices and four times more device connectivity as compared to wifi 5.
Netgear Nighthawk AX4300 WiFi Router Manual
In the user manual of the Netgear Nighthawk AX4300 WiFi Router. You get to know about the installation and the setup of the device. It is important to read the user guide before you begin the procedure of setting up the device with your existing network. When you open the user manual, you will walk through a whole guide. In which you get to know how you can unpack the router and what items you will receive in a package of the device. You get each and every piece of information if you read the user manual carefully.
It helps to provide you with more information about the product. It also guides you when you fall into any trouble regarding the router. If you directly want to jump into any topic such as installation, setup, or troubleshooting in an easier way. Then you can read this article…
Netgear AX4300 Wireless Modem Instructions
Before you begin the installation or the setup of the Netgear Nighthawk wifi router. You just have to follow some basic steps so as to avoid future problems with the device. It needs to be positioned in an accurate place. So that it can provide you with seamless connectivity all over the house. Check the steps to position the router at your home and the things that you need to consider while positioning the wifi router.
- You have to place the Netgear router near the center area of your house by making sure that it would bear the wifi-enabled and other devices and within the sight of computer devices.
- Also, you need to make sure that the wifi router should be within the reach of an AC power outlet. Also other Ethernet cable devices for wired computers.
- You should place the wifi router in a certain place that is higher than the surrounding area. Also, you need to minimize the number of walls, and ceilings. It should be placed between the wifi router and other wifi devices.
So these are the important things that you need to follow while placing the wifi router at your home. Also, you should follow the conditions for fast network coverage.
Netgear Nighthawk AX4300 WiFi Router Installation
Well, the hardware setup of the Netgear Nighthawk AX4300 WiFi Router is easy and straightforward. You can simply connect to the home router by using a secure wired, wifi, or a WPS connection. Moreover, if you choose to set up the connection with a computer. Then you have to use a static IP address and also you need to change the settings. So as to use the Dynamic Host Configuration Protocol.
But first of all, you have to unpack the wifi router and check all the major components that you will receive in a box.
- The first and foremost is the Nighthawk AX4300 WiFi Router
- The power adapter
- Four antennas
- An Ethernet cable
This is the list of the things that you get into a box of the router. If you find any of the items missing or broken then immediately contact the dealer. Replace them with a new one. After opening the box, now you have to attach and position the antennas. They can be attached to any port of the wifi router. Well, the labeled antennas must be attached to the correct antenna port of the router and then you have to complete the positioning of the router. Once you are done with all the instructions, you have to wall mount the router, and here are its steps.
Installation Steps
- To wall mount the router, it requires mounting holes and M3 x 20 mm screws to fix into the bottom of the wifi router.
- So primarily, you have to drill the holes in a wall or wherever you want to wall mount the Netgear wifi router.
- After that, you need to insert the wall anchors into a hole.
- Next, you need to insert screws by leaving 3/16 inches until each of the screw holes is exposed.
- Lastly, you need to align the wall mounting hole of the wifi router. So as to carry both the screws and mount the wireless router.
When you are done with the wall mounting of the router. You have to power on the router and connect it to a modem. Later, you need to plug the power adapter of the router into an electrical outlet. Wait until the LEDs of the router turn solid white.
Netgear AX4300 Wireless Router Setup
After a successful installation of the Netgear Nighthawk AX4300 WiFi Router, you can simply connect to the computer by using an Ethernet cable and connect to the router’s local area network (LAN). Here are the steps to connect the wireless router to a computer device.
- First of all, you have to make sure that the wifi router should be receiving a solid power connection. You can check it by looking at the LEDs and making sure it is Lit.
- After that, you have to connect the Ethernet cable to an Ethernet port of the wifi-enabled device such as a computer.\
- Thereafter, you have to connect another end of the cable to the Ethernet port and connect to the Ethernet port of the wireless router.
Thus, the computer is now connected to the local network and the wired setup is completed successfully.
Netgear Nighthawk AX4300 WiFi Router WiFi Setup
To complete the wifi setup, you have to connect wifi-enabled devices to the wifi network of the wifi router and in that case, it basically requires the router’s wifi network name and wifi password. Thus, in order to complete the wifi setup follow the steps that are discussed below.
- First of all, you need to make sure that the wifi router is receiving power and the rear panel LED is lit.
- You have to open the management settings of the wifi-enabled device.
- Next, simply find and select the wifi network name (SSID) of the router. If you don’t know the network name then you can check out the label of the router and gather information.
- After getting the wifi network name and the wifi password. You need to enter the network key and it is also labeled on the label of the wifi router.
This is how you have to complete the wifi setup of the Netgear wifi router and it will successfully connect to the wifi network.
Netgear Nighthawk AX4300 WiFi Router Review
The Netgear Nighthawk AX4300 WiFi Router provides smooth and seamless 4K UHD content. So that you can stream your favorite movie and show on mobile, TV, and gaming console devices. It enables faster wifi download so that you are able to upload large files at the same time. Moreover, you can enjoy a greater speed of 1 Gbps for turbo speed streaming and downloading the shows in better and higher quality. Overall, it is powerful and a useful device that seamlessly reaches every corner of your house. Highly recommended.